Howto wipe a hard drive clean in Linux
From Wikihowto
You may need to wipe you hard drive to clean up partition errors, bad installations, or for privacy. This will show you howto do this
These methods use a command called dd
Contents |
[edit] Wiping the entire disk
This will overwrite all partitions, master boot records, and data.
- Filling the disk with all zeros (This may take a while, as it is making every bit of data 0) :
dd if=/dev/zero of=/dev/sda bs=1M
- If you are wiping your hard drive for security, you should populate it with random data rather than zeros (This is going to take even longer than the first example.) :
dd if=/dev/urandom of=/dev/sda bs=1M
[edit] Wiping the Master boot record (MBR)
If you messed up your master boot record (MBR) you can wipe it using this command :
dd if=/dev/zero of=/dev/hda bs=446 count=1
[edit] Wiping partitions
You can wipe a partition using the same method than for the whole disk. Just replace the device identifier. If /dev/sda is the whole disk, then (on Linux, because the naming scheme vary from one Unix to another) /dev/sda3 is the third partition on the disk.
- Filling the second partition on the /dev/sda disk with all zeros :
dd if=/dev/zero of=/dev/sda2 bs=1M
- Filling the third partition with random data :
dd if=/dev/urandom of=/dev/sda3 bs=1M
[edit] Wiping specific files
- try the command "wipe filename" (cf more detail man wipe or wipe -h)
- Can also try the command "shred" ex: # shred -n 6 -z -v personalinfo.tar.gz (cf man shred)
